半径为3的圆的面积C语言

#includeintmain(){floatr,s,l;scanf("%f",&r);s=3.14*r*r;l=2*3.14*r;printf("s=%f,l=%f\n",s,l);return0;

#include#definepi3.141592653intmain(){doubler;printf("输入半径：\n");scanf("%lf",&r);printf("周长为：\n");pri

#definePI3.1416//后面不需要;#include"stdio.h"//注意关键字之间要有空格intmain(){floatr,s,c;scanf("%f",&r);c=2*PI*

在输入半径的时候,语句改成scanf("%d",&r);不过你最好将半径定义成float型变量,格式的问题

scanf("%d",&r);

voidmain(){floatr,s,l;floatpi=3.1415;printf("输入一个圆的半径:\n");scanf("%f",&r);if(

#include#definePI3.1415926\x05\x05voidmain()\x05{\x05doubler,s;scanf("%f",&r);s=PI*r*r;\x05printf("A

圆的面积=Pi×r×r；圆柱体的体积=Pi×r×r×h；圆柱体的表面积=2×pi*r*（r+h）；

拿去慢慢研究吧#includeintmain(void){doubler=3.0,pi=3.14159,s;s=r*r*pi;printf("圆的面积为%lf",s);return0;}

#includeintmain(){intr;printf("请输入r：");scanf("%d",&r);printf("面积是：%f\n",2*3.1415*r*r);return0;}再问：没有

1.#includeintmain(){floatr,s,l,v;printf("请输入半径\n");scanf("%f",&r);s=3.14*r*r;l=2*3.14*r;v=4.0/3.0*3.

#include#defineMianji(x)Pi*r*r#definePi3.1415926intmain(){\x09floatr;\x09printf("请输入半径r：\n");\x09sca

首先程序是能够编译通过的,只是结果不是你想要的.#defineS(bj)PI*bj*bj修改为#defineS(bj)(PI*(bj)*(bj))doublemianJi;修改为float类型.或者将

#include"stdio.h"#definePI3.14intmain(){floatarea,sum=0;for(inti=1;i

#includeintmain(){intr=0;floata=0,l=0;scanf("%d",&r);a=r*r*3.14;l=r*2*3.14;printf("面积:%f,周长:%f",a,l)

#include#includemain(){doublearea,length;doubler=pi=3.1215926area=pi*r*r；length=2*pi*r；}

#include"stdio.h"#definePI3.141592653//定义πintmain(void){floatC,A,V,r;printf("请输入半径：");//提示输入scanf("%

S=π r ²=100cm²r=√(100/π）cm  

#include#include#includeusingnamespacestd;intmain(){intr=15,h=3;doublec=2*3.14*r;doubles=pow(r,2)*3.

#include#definepi3.1415926//宏定义voidmain(){inti;doublearea;for(i=1;i