英语翻译英文机械图纸上的,NOTE A:NEXUS AND PART NO.NXS58578 IN RAISED OR

英语翻译
英文机械图纸上的,
NOTE A:NEXUS AND PART NO.NXS58578 IN RAISED OR DEPRESSED MARKINGS MIN SIZE 4
NOTE B:NEXUS COMPONENT NOT FOR USE ON CATERPILLAR DESINGS
NOTE C:FORGING
NOTE D:HDNS BR 3.15-3.45
MIN HDNS RKW C30 AT 6.5 DEPTH BELOW ANY SURFACE
NOTE E:HDNS SURF.A LG H1&H2 RKW C48-56
HDN DP LG H1 (RKW C45) 4 MIN FROM PLANE B
NOTE F:MARKINGS CLASS II
CLEAN FORGING
NOTE G:SUPPLIER TRADMARK,DIE IDENTITY AND STLIDENTITY IN RAISED OR DEPRESSED MARKINGS MIN SIZE 4
NOTE H:DATUM X ESTABLISHED BY DATUM TARGETS X1,X2,X3 AND THEIR STEP DIFFERENCE
NOTE J:DATUM X ESTABLISHED BY LOCATING POINTS A1,A2,A3 AND THEIR STEP DIFFERENCE
NOTE K:GRADUAL CHG IN RADII
FROM 10 AT K-K TO 70 AT E-E
NOTE L:GRADUAL CHG IN DRAFT ANGLE:
FROM 7 AT D-D TO 5 AT S-S
BOTH WINDOWS
PRO/ENGINEER SOLID GEOMETRIC MODEL WITH FILENAME 175-8578 AND CHG 00 OR MODEL OF PART NI.175-8577 STAMPED CHG 00 MUST BE CONSIDERED A PART OF THE SPEC FOR THIS LINK AND MUST BE REFFERED TO FOR FEATURES WHICH CANNOT BE DETERMINED BY DIMENSIONS ON THIS DWG.

注一:纽带和部分没有NXS58578或沮丧的最小尺寸的标记
注意B:连结组件不用于卡特彼勒中的
注意丙级:锻造
注:HDNS溴3.15——今年的345
在RKW C30最小HDNS 6.5深度以下任何表面
注:HDNS冲浪LG H1&H2 RKW一C48 - 56
DP LG H1(RKW传统C45)4分钟从平面B
注:标记二类
干净的锻造
注:供应商身份和STLIDENTITY套,死于提高或沮丧的标记最小尺寸
注:数据由基准目标X1××2、三、和他们的步骤之间的差别
注:数据X由定位点A1、A2、A3和他们的步骤之间的差别
凯西:逐渐CHG笔记中半径
10在K-K E-E至70岁时
注:在逐渐CHG角度.
在D-D从7 S-S 5时
窗户都
PRO /工程师坚实的几何模型和文件名175 - 8578和CHG 00或模型的基础上,8577 CHG NI.175部分时必须考虑到邮票的一部分,这个链接,规格为特色,必须REFFERED不能确定这个对话尺寸.