英语翻译一般是用轻的竹子或树胶棒或柴棍之类的东西,首先你要设计出一个形状,然后扎好,要注意一定要对称,后面还要加一个适合
来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/10/06 22:28:33
英语翻译
一般是用轻的竹子或树胶棒或柴棍之类的东西,首先你要设计出一个形状,然后扎好,要注意一定要对称,后面还要加一个适合重量的尾巴保持平衡,然后用纸糊上,晾干就可以,再买风筝线,与轴,就可以在放了.
最好可以用英文翻译以上内容.也可以自己写一段.
一般是用轻的竹子或树胶棒或柴棍之类的东西,首先你要设计出一个形状,然后扎好,要注意一定要对称,后面还要加一个适合重量的尾巴保持平衡,然后用纸糊上,晾干就可以,再买风筝线,与轴,就可以在放了.
最好可以用英文翻译以上内容.也可以自己写一段.
How to Make a Kite
Instructions
STEP 1:Cut two lengths of doweling rod,one 16 inches long and another 24 inches long.
STEP 2:Measure each cut piece with a ruler.Mark the shorter,16-inch piece at half its length and mark the longer,24-inch piece at a third of its length.
STEP 3:Position the two rods at right angles,one on top of the other so that the marks touch.The two rods should form a cross shape.
STEP 4:With strong,thin string,bind the two rods together where they meet.Tie a secure knot and cut off excess string.STEP 5:Use a utility knife to cut a small notch into the ends of both rods.These notches will hold the string that gives the kite its shape.
STEP 6:Place some string in the notch at the top of the kite frame and wind it around the top of the rod.
STEP 7:When the string is well-secured at the top of the rod,draw it tightly around the edge of the frame.Make sure it fits securely into each notch in the rods.
STEP 8:When you return to the top of the frame,secure the string by tying its ends together in a tight knot.
STEP 9:Place the finished frame on top of a large piece of paper.
STEP 10:Using the kite frame as a template,cut the paper with scissors or a utility knife.Leave an excess of about 1/2 inch when cutting around the sections of string.
STEP 11:Smear glue along the outside edges of the paper and fold it over so that it encloses the string and secures itself to the paper inside the frame as well.Make sure you use enough glue and spread it evenly enough to attach the paper both to the string and itself.
STEP 12:Tie a length of string to each end of the shorter rod.The string should be a bit longer than the rod.
STEP 13:Tie another length of string to each end of the longer rod.Again,the string should be a bit longer than the rod.
STEP 14:Pick up the two strings with one hand,finding the point at the front of the kite where they overlap.Using a bit of extra string,tie them together.This is the point at which you will attach the kite string when it comes time to fly.STEP 15:To make a tail for your kite,secure
Instructions
STEP 1:Cut two lengths of doweling rod,one 16 inches long and another 24 inches long.
STEP 2:Measure each cut piece with a ruler.Mark the shorter,16-inch piece at half its length and mark the longer,24-inch piece at a third of its length.
STEP 3:Position the two rods at right angles,one on top of the other so that the marks touch.The two rods should form a cross shape.
STEP 4:With strong,thin string,bind the two rods together where they meet.Tie a secure knot and cut off excess string.STEP 5:Use a utility knife to cut a small notch into the ends of both rods.These notches will hold the string that gives the kite its shape.
STEP 6:Place some string in the notch at the top of the kite frame and wind it around the top of the rod.
STEP 7:When the string is well-secured at the top of the rod,draw it tightly around the edge of the frame.Make sure it fits securely into each notch in the rods.
STEP 8:When you return to the top of the frame,secure the string by tying its ends together in a tight knot.
STEP 9:Place the finished frame on top of a large piece of paper.
STEP 10:Using the kite frame as a template,cut the paper with scissors or a utility knife.Leave an excess of about 1/2 inch when cutting around the sections of string.
STEP 11:Smear glue along the outside edges of the paper and fold it over so that it encloses the string and secures itself to the paper inside the frame as well.Make sure you use enough glue and spread it evenly enough to attach the paper both to the string and itself.
STEP 12:Tie a length of string to each end of the shorter rod.The string should be a bit longer than the rod.
STEP 13:Tie another length of string to each end of the longer rod.Again,the string should be a bit longer than the rod.
STEP 14:Pick up the two strings with one hand,finding the point at the front of the kite where they overlap.Using a bit of extra string,tie them together.This is the point at which you will attach the kite string when it comes time to fly.STEP 15:To make a tail for your kite,secure
用英语表达八种图形一定要八种或以上!还要说出和有这八种图形形状的东西各三个麻烦再补充一下,是一个图形三个,都要说英语
我们要画一个正方形的适合纹样,请问左右一定要对称,图画一样的吗?
新手适合什么 形状的 悠悠球?还要推荐一个价格在10元左右的好用悠悠球 好的多加50分以上!
如何用英语翻译一个东西形状或特性
选择适合你或你们小队的内容开展活动,一定要填写好活动记录哦!
英语翻译注意复数后面要加s或es噢!回答正确加15分!
用"文"字组词 后面加一个什么字好!(适合做名字的,男孩、女孩的都要)
用英语表达八种图形一定要八种或以上!还要说出和有这八种图形形状的东西各三个
英语翻译我是给一个美国家庭写回信 如果你觉得有什么要加的 直接加上 然后中英文对照解决抵制网页或电子翻译OK 下面是那段
英语翻译首先,我们要保护环境,爱护数目,不要乱丢垃圾,保持城市的清洁,给外国朋友一个好印象。我们还要好好学习,尤其是学好
形容一个东西或人“位置轻、不重要”之类的成语
薇妮组词,在前面加一个字,或后面加一个字,要有点唯美的意思