作业帮 > 英语 > 作业

英语翻译Where painting is carried out at the manufacturers’ work

来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/11/12 06:59:34
英语翻译
Where painting is carried out at the manufacturers’ works and where erection at Site is the responsibility of the Contractor,any damage during delivery or erection at Site shall be made good to the requirements of the Project Manager including,where deemed necessary,application of a complete finishing coat of an approved colour and quality paint.
Where painting is carried out entirely at Site after erection,the whole of the Plant,including bare pipe surfaces and hand railing,shall be well wire brushed down and cleaned after which all parts shall be given one coat of primer,one undercoat and at least one finishing coat of an approved colour and quality paint.
All paint shall have appropriate standard finish,requiring at least two finishing coats on prepared surfaces properly filled in to provide a smooth finish.The insides of outdoor control cubicles,cabinets,etc.,where condensation is liable to occur,shall receive the same number of coats.
英语翻译Where painting is carried out at the manufacturers’ work
在喷漆是在制造商的工场完成,而安装是在项目现场由总包商负责的场合,任何在运输和现场安装过程中的损毁都必须按项目经理的要求进行补偿/补救,包括--在认为必要的情况下--实行完整的用已被批准的颜色和质量的油漆完成面漆.
如果喷漆完全是在现场安装后进行,工厂的全部,包括裸管表面和扶手/栏杆,必须用钢丝刷刷干净并清洁后,所有部件必须打底漆,用以批准的颜色和质量的油漆打一层底漆和至少一层面漆.
所有的油漆必须有合适的标准表面处理,要求至少在正确处理好并填充好(可能就是俗称的打腻子)的表面刷两层面漆以理工平滑的表面.放在室外的控制柜,箱体等的内部,如果发生有冷凝(水)的可能性很大的话,也应接受到同样数量的漆层.