作业帮 > 英语 > 作业

英语翻译The typical formula used to determine the necessary volu

来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/09/22 16:34:45
英语翻译
The typical formula used to determine the necessary volume of water or flow rate to apply is as follows:
Gross need= (Net need for ET leaching)/((WAE/100))
ET stands for evapotranspiration and is discussed in Section 3.15.The value of WAE must account for the DU,evaporation losses,and a reasonable estimate of management (timing).
Example
Find the gross depth that must be applied and the necessary sprinkler gallons per minute.Sprinklers spaced at 40X40 ft.Estimated WAE is 75%.Sprinklers can run for 4 hours and must apply a net of 1.5 in.
Formula
Gross=Net/(WAE/100)
Gpm =(Gross inches)X(Area in square feet)/(Hours X 96.3)
Gross=1.5 in.(75%/100)=2.0 in.needed
Gpm =(2.0X40’X40’)/(4hr.X96.3)=8.3gpm
上面的net会不会是网?因为文中"must apply a net of 1.5 in."这里的是否应该解释为需要有1.5英寸的滤网?
英语翻译The typical formula used to determine the necessary volu
net need和gross need相对,前者是净需求量,后面是毛需求量.
试译一下:
确定需水量的常用公式如下:
总需水量=渗滤所需ET净量/WAE*100
其中ET为蒸发量,数值计算参见3.15部分.WAE(可能是蒸发损失率及估算误差?)值必须包含DU(不知道什么东东?)、蒸发损失及相当的操作估算值.
例题:
请计算所需灌溉系统总深度和每分钟灌溉量.其中灌溉距离40X40英尺.WAE估计值为75%,灌溉系统可以运行4小时,必须使用1.5英寸的净量.
公式:
总量=净量/损失率*100
Gpm(每分钟灌溉量)=总量(英寸)*面积(平方英尺)/[时间(小时)*96.3]
需要的总量=1.5(英寸)/75%*100=2.0英寸
Gpm=(2.0*40英尺*40英尺)/(4小时*96.3)=8.3gpm