ANSYS 非线性分析计算,子载荷步为1000,为什么计算到70多步的时候就自动结束了?错误提示如下:
来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/09/23 19:15:58
ANSYS 非线性分析计算,子载荷步为1000,为什么计算到70多步的时候就自动结束了?错误提示如下:
One or more elements have become highly distorted. Excessive
distortion of elements is usually a symptom indicating the need for
corrective action elsewhere. Try incrementing the load more slowly
(increase the number of substeps or decrease the time step size). You
may need to improve your mesh to obtain elements with better aspect
ratios. Also consider the behavior of materials, contact pairs,
and/or constraint equations. If this message appears in the first
iteration of first substep, be sure to perform element shape checking.
One or more elements have become highly distorted. Excessive
distortion of elements is usually a symptom indicating the need for
corrective action elsewhere. Try incrementing the load more slowly
(increase the number of substeps or decrease the time step size). You
may need to improve your mesh to obtain elements with better aspect
ratios. Also consider the behavior of materials, contact pairs,
and/or constraint equations. If this message appears in the first
iteration of first substep, be sure to perform element shape checking.
网格高度畸变,导致计算中止 ,可以尝试增加载荷步,减小时间步长,开启大变形选项
ANSYS 非线性分析计算,子载荷步为1000,为什么计算到70多步的时候就自动结束了?错误提示如下:
ANSYS中为什么只能计算第一个荷载步,以下的就不能计算了
在用ansys进行地震波输入的动力时程分析时,计算到1033步时,出现了以下的提示信息,请问应做何改正?
ansys的载荷步是什么
Ansys 多载荷步不能保存问题
如下的三个图是在ansys静力分析,载荷施加和求解过程中出现的,当最后点击yes后,ansys自动退出了,
ansys中进行多载荷步求解问题
abaqus进行动态分析时,计算得太慢了,载荷步总共才5s,计算了两天两夜,才计算不到1s,有什么方法能加快计算的吗?
ansys 收敛图ansys计算非线性的时候会绘制收敛图----cumulative iteration number
ansys 做静力分析的时候,载荷和约束都加好了,但是点solve就没反应,一会儿整个ansys窗口就没了
多步计算
ANSYS非线性分析计算时,为什么没有收敛追踪图出现