英语翻译因为过SMT后 L616.L617,L618,L621,L623等0402电感零件偏移歪斜,故针对零件做了温度冲
来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/09/22 05:21:14
英语翻译
因为过SMT后 L616.L617,L618,L621,L623等0402电感零件偏移歪斜,故针对零件做了温度冲击,单体振动,单体跌落,推力测试.试验后零件能承受厂商提供112g的推力且产品功能正常(ping test and ftp test),但由于零件过小测试推力无法精确,所以此次测试结果仅供参考
因为过SMT后 L616.L617,L618,L621,L623等0402电感零件偏移歪斜,故针对零件做了温度冲击,单体振动,单体跌落,推力测试.试验后零件能承受厂商提供112g的推力且产品功能正常(ping test and ftp test),但由于零件过小测试推力无法精确,所以此次测试结果仅供参考
Afer SMT, L616, 0402 inductors such as L617,L618,L621,L623, ect, will be distorted. So temperature ictus, monomer vibration, monomer fall, thrust test are operated on the part. it can support the thrust of 112g which is provided by supplier and maintains normal function(ping test and fip test) after test, but for the inductor is too small to test accurately, the test report can only be refered.
英语翻译因为过SMT后 L616.L617,L618,L621,L623等0402电感零件偏移歪斜,故针对零件做了温度冲
想问下SMT高手么,我用CAM350将GERBER的零件坐标导出后,零件的大小怎么测量?听说用CAD可以办到,
王师傅做了330个零件,徒弟做了50个零件,王师傅给徒弟多少个零件后,王师傅的零件数就是徒弟的4倍?急...
英语翻译针对电器开关过电片零件加工工艺的缺点提出冲压工艺及模具设计,提高材料的利用率和劳动生产率.本论文说明了电器开关过
如何在曲面上刻字?在制作PROE零件时 需要在曲面上面刻字 就像是在酒瓶上的那种 我用过包络,偏移等命令 但是由于不熟悉
做一个机器零件,原来要用24分钟,技术革新后所用时间比原来节省了4分之1.现在做一个零件需要多少分钟?
张师傅制造一个零件要5分钟,徒弟小王要9分钟,他们合作一段时间后,共做了168个零件,求这段时间里他们各做了多少零件?
第一机械厂计划做2000个机器零件,每个零件用钢材14.3千克.在完成了计划的4分之1后,改进了
阳极化处理过的零件表面划伤后怎么办
一根钢材长五分之4米,做了5个同样的零件后,还剩十分之3米,问平均每个零件
一根钢材长2分之9米.做了12个同样的零件后,还剩10分之13米.每个零件需用钢材多少米?算式.
李师傅5分之2小时做了10零件,做一个零件要多少小时