英语翻译1) os测试全部显示为AVDD短路2) 二极管测试AVDD对地导通,正常品是断开3) 在正常品上施加9V的电压
来源:学生作业帮 编辑:大师作文网作业帮 分类:英语作业 时间:2024/09/23 17:11:22
英语翻译
1) os测试全部显示为AVDD短路
2) 二极管测试AVDD对地导通,正常品是断开
3) 在正常品上施加9V的电压做测试,结果AVDD全部短路
4) 存在两种JIG PCB ,且程序要设定的AVDD输出电压不同,一个是 2.8V,另一个是5V.
5) 出现不良原因应该是使用2.8V的JIG PCB 时,程序设定的AVDD输出电压是5V,导致出现不良.
1) os测试全部显示为AVDD短路
2) 二极管测试AVDD对地导通,正常品是断开
3) 在正常品上施加9V的电压做测试,结果AVDD全部短路
4) 存在两种JIG PCB ,且程序要设定的AVDD输出电压不同,一个是 2.8V,另一个是5V.
5) 出现不良原因应该是使用2.8V的JIG PCB 时,程序设定的AVDD输出电压是5V,导致出现不良.
1) all os tests appear to be AVDD shortcircuit;
2)AVDD conducts to ground after tested with diode,which should release connnection as normal state;
3)do a test by applying voltage of 5V to a normal good with a result of all ADVV shorting;
4) there exist 2 kinds of JIG PCB which should be set with different output voltage-- 2.8V and 5V;
5)what results in the bad outcome may be the wrongly set output viltage of 5V as using the JIG PCB of 2.8V.
非机器翻译
2)AVDD conducts to ground after tested with diode,which should release connnection as normal state;
3)do a test by applying voltage of 5V to a normal good with a result of all ADVV shorting;
4) there exist 2 kinds of JIG PCB which should be set with different output voltage-- 2.8V and 5V;
5)what results in the bad outcome may be the wrongly set output viltage of 5V as using the JIG PCB of 2.8V.
非机器翻译
英语翻译1) os测试全部显示为AVDD短路2) 二极管测试AVDD对地导通,正常品是断开3) 在正常品上施加9V的电压
12V变压器短路电压检测12V变压器的质量,空载 短路的电压是多少的范围呢?一般变压器测试时候,在线电压在什么范围是正常
家庭用的普通插板工作正常的情况下放在水中为什么不短路不漏电的情况,电笔测试水里电压220v正常情况用手触摸水里竟然不会触
电灯开关闭合后电灯不亮,电灯泡是正常的,电笔测试火线显示12V.
单相电,用数字电笔测试,在电器的外部电压110v,零线电压110v,火线220v,这样的电压正常吗?
把一个阻值为5欧姆,正常工作电压是2.5V的灯泡.接在6V的电源上,要使灯正常发光,应该怎么办?
智商测试值为80分是正常的吗?
英语翻译1.我们在300倍显微镜下观察外观是正常的,通过仪器测量电阻也是正常的.2.在平台上第一次使用软件测试,测试的平
地线用电笔测量有12V电压是否正常,正常通电情况下用万用表测量零 地,零地是否为短路状态
关于地暖压力测试,下降多少为正常啊
某电铃的电阻为10欧姆,正常工作时它两端电压是4V,现把它接在9V的电源上,欲使它正常工作,应该给它串联一个
L是一盏电灯,正常工作时电压是6V,电阻为18Ω,电源电压为9V,为了使电灯的电压即不超过正常工作电压,又不低于3V,求